609176001516000 [KYOCERA AVX]
PCB Connector;
| 型号： | 609176001516000 |
| 厂家： | 
KYOCERA AVX |
| 描述： | PCB Connector PC 连接器 |
| 文件： | 总5页 (文件大小：622K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Single IDC Contact 18-24 AWG: WTB
9176-500
INTER
CONNECT
The 917X series of surface mount Insulation Displacement Connectors (IDC) were developed to meet
the harsh automotive and industrial market applications for connecting individual wires directly to a PCB
ranging from 14 AWG to 28 AWG. This industry proven contact system has been tested to automotive
levels of shock, vibration, and temperature cycling to prove their reliability and robustness. This new
single contact was developed as a standalone component to enhance the application uses with the IDC
technology. The simplicity of inserting a wire into an SMT contact with a small tool or optional retention
/ termination cap allows a wide range of devices to be connected to the PCB without soldering. In SSL
applications specifically, these contacts are used to bring power and signal onto the PCB or are used to
daisy chain multiple boards together in a long string. While the IDC contact provides a gas-tight
connection to conductor of the wire, the optional cap provides a positive strain relief even in the harshest
conditions. In case of repair, the wires can be removed and replace up to three times.
The single 9176 series contact and cap accepts 18 AWG to 24 AWG wires with an insulation diameter
ranging from 1.1mm to 2.1mm. These dual beam contacts support a 10 amp current rating with a large
SMT solder base to provide maximum stability on the PCB. The optional locking strain relief cap acts
as the termination tool for severe vibration applications.
APPLICATIONS
FEATURES AND BENEFITS
• Connecting discrete wire components
directly to the PCB
• Bringing power and signals onto a PCB
• Daisy chaining PCB’s together to create
a continuous string of boards
• IDC contact is supplied in T&R pockets for standard SMT placement
• IDC contact provides a gas-tight connection to the PCB for long term reliability
• Optional termination cap provides additional strain relief for severe environments
• Tested to automotive levels on shock, vibration and temperature cycling for reliability
• Reduced total applied cost versus solder or crimp processes
• Application notes: refer to 201-01-124
• Individual contacts can be located anywhere on the PCB based on specific application
ELECTRICAL
ENVIRONMENTAL
MECHANICAL
• Current Rating: 10 Amps/Contact
• Voltage Rating: Dependant on
component proximity
• Operating Temperature:
-40ºC to +125ºC
• Insulator Material: Nylon 46: UL94V0
• Contact Material: Phosphor Bronze
• Plating: Tin over Nickel
• Durability: 3 Cycles
HOW TO ORDER – CONTACT OPTIONS
001
5XX
006
70
9176
Number of Ways
No of
Wire Gauge Size
Plating
Option
006 = Pure Tin
all over
Prefix
70 = Contact
Series
Code
Accepted
Wire Gauge
18 Gauge Stranded
Code
Details
Ways
001
1
Page 3
501
511 20 Gauge Solid or Stranded
522 22 Gauge Solid or Stranded
532 24 Gauge Solid or Stranded
HOW TO ORDER – CAP OPTIONS
001
5XX
X00
60
9176
Number of Ways
No of
Wire Gauge Size
Insulator Color
Prefix
60 = Cap
Series
Code Color Application
Code Wire Insulation
(AWG)
Code
Details
Ways
000 Black
100 White
Industrial
Lighting
001
1
Page 5
516
521
1.1-1.6 (22-24)
1.6-2.1 (18-20)
CONNECTOR/TOOLING PART NUMBER MATRIX
SERIES 9176-500 IDC
HAND INSERTION TOOLING*
ACCESSORY CAPS
Wire
Plastic
(medium volume)
Metal
(high volume)
Cap Application
Tool
AWG
Positions
Part Number
White
Black
Insulation
Ø 1.6 - 2.1
Ø 1.6 - 2.1
Ø 1.1 - 1.6
Ø 1.1 - 1.6
18
20
22
24
1p
1p
1p
1p
709176001501006 069176702001000 069176701901000 069176701801000 609176001521100 609176001521000
709176001511006 069176702001000 069176701901000 069176701801000 609176001521100 609176001521000
709176001522006 069176702002000 069176701902000 069176701801000 609176001516100 609176001516000
709176001532006 069176702002000 069176701902000 069176701801000 609176001516100 609176001516000
* Hand Insertion Tooling and Cap Application - Universal Hand Tool 067000773001000; Consult Application Notes 201-01-124
Certification: UL File #E90723
1
Single IDC Contact 18-24 AWG: WTB
9176-500
INTER
CONNECT
CONTACT DETAILS
Code
Accepted
Wire Gauge
A
501
511
522
532
18 AWG Stranded
0.72
20 AWG Solid and Stranded 0.60
22 AWG Solid and Stranded 0.47
24 AWG Solid and Stranded 0.37
NOTES:
1. CONNECTOR FOR IDC WIRE TO BOARD CONNECTION.
2. CONTACT MATERIAL: PHOSPHOR BRONZE.
3. CONTACT PLATING: PURE TIN.
4. CONNECTOR DESIGNED TO ACCEPT BETWEEN 18 AND 24 GAUGE STRANDED WIRE. SEE TABLE.
5. ALL DIMENSIONS FOR REFERENCE UNLESS OTHERWISE STATED.
6. FOR FULL PRODUCT SPECIFICATION REFER TO ELCO SPEC 201-01-106 AND APPLICATION NOTES 201-01-124.
7. SMT PCB LAYOUT, REFER TO PAGE 3.
8. PACKING IN TAPE AND REEL, QUANTITY 1000 PER REEL.
9. WHEN REQUIRED, MATCHING CAP DETAILS ON DRAWING 60-9176-001-5XX-X00S.
10. ASSEMBLY TOOLING ON PAGE 5 (WITH CAP AND WITHOUT CAP).
PACKING DETAILS
REEL QTY
LEADER
TRAILER
1000
480MM
120MM
2
Single IDC Contact 18-24 AWG: WTB
9176-500
INTER
CONNECT
18-24 AWG IDC WIRE TO BOARD CONNECTOR
SINGLE CONTACT
SMT PCB LAYOUT
PURE TIN PADS
ORIENTATION OF CONTACT ON PAD
ASSEMBLED/INSTALLED PRODUCTS
NOTES:
1. CONNECTOR CAN BE USED WITH CONTACT ONLY OR WITH OPTIONAL CAP.
2. OUTLINE OF CAP WHEN USED.
3. FOR FULL PRODUCT SPECIFICATION REFER TO ELCO SPEC 201-01-106 AND 201-01-124.
4. DIMENSIONS SHOWN ARE REFERENCED DIMENSIONS.
5. ASSEMBLY TOOLING ON PAGE 43 (WITH CAP AND WITHOUT CAP).
3
Single IDC Contact 18-24 AWG: WTB
9176-500
INTER
CONNECT
ASSEMBLY TOOLING – CAP USED
CAP APPLICATION TOOL
06-9176-7018-01-000
ORIENTATE CAP
IN TOOL
UNIVERSAL HANDLE
06 7000 7730 01 000
NOTES:
1. ASSEMBLY TOOLING FOR CAP.
2. AREA OF PCB TO BE KEPT CLEAR OF COMPONENTS,
TACKS PERMISSIBLE.
3. WIRE AND CAP INSERTED IN ONE OPERATION.
4. REFER TO APPLICATION NOTE 201-01-124 FOR FURTHER
INFORMATION.
5. REFER BELOW WHEN CONTACT USED WITHOUT CAP.
ASSEMBLY TOOLING – CAP NOT USED
WIRE ONTO CONTACT
1.6 WIRE (22-24 AWG)
06-9176-7019-02-000
2.1 WIRE (18-20 AWG)
06-9176-7019-01-000
06-9176-7020-02-000
06-9176-7020-01-000
UNIVERSAL HANDLE
06 7000 7730 01 000
NOTES:
1. ASSEMBLY TOOLING FOR CONTACT ONLY, NO CAP USED.
2. MINIMUM AREA OF PCB TO BE KEPT CLEAR OF
COMPONENTS, TRACK PERMISSIBLE.
3. REFER TO TABLE FOR CORRECT TOOL/WIRE COMBINATION.
4. REFER TO APPLICATION NOTE 201-01-124 FOR FURTHER
INFORMATION.
Wire Guage
Wire
Metal Tool
High Volume
Plastic Tool
Handle
Insulation ø
Small to Medium Volume
22-24 AWG
18-20 AWG
1.10 to 1.60 06-9176-7019-02-000 06-9176-7020-02-000 06-7000-7730-01-000
1.60 to 2.10 06-9176-7019-01-000 06-9176-7020-01-000 06-7000-7730-01-000
4
Single IDC Contact 18-24 AWG: WTB
9176-500
INTER
CONNECT
CAP DETAILS
Code Insulator Diameter
(AWG)
B
Text C
516 1.1 to 1.6 (22-24) 1.00 Ø 1.6
521 1.6 to 2.1 (18-20) 1.50 Ø 2.1
NOTES:
1. CAP FOR IDC WIRE TO BOARD CONNECTION.
2. CAP MATERIAL: GLASS FILLED NYLON 46, COLOR SEE PAGE 1.
3. CAPS DESIGNED TO ACCOMMODATE WIRE INSULATION DIAMETERS 1.1MM TO 2.1MM.
4. ALL DIMENSIONS FOR REFERENCE UNLESS OTHERWISE STATED.
5. FOR FULL PRODUCT SPECIFICATION REFER TO ELCO SPEC 201-01-106, APPLICATION NOTES 201-01-124.
6. PACKING IN BAGS, QUANTITY 1000 PER BAG.
7. FOR INSTALATION DETAILS REFER TO DRAWING 70-9176-001-XX-006S.
5
相关型号：
©2020 ICPDF网 联系我们和版权申明